Settings - Sharp PN-L401C Operation Manual

Follow the steps below to configure settings for this software.
1. Touch "Home" (
2. Touch "Settings".
The settings screen appears.
3. When you have finished configuring settings, touch "OK".
n General
Web sheet URL
Public meeting mode
Normal meeting mode
Pen digitizer mode
Monitored folder path
n Customize
Default setting
Custom setting
Boldness of the pen
Clock and timer
Others
26
E
) on the Tools.
Set the URL of the Web page that initially appears on the Web sheet.
Select this if you do not want data to remain when you exit this software, such as on a shared
computer.
In Public meeting mode,
• W hen you exit, all sheets in the work area are closed.
In addition, all files in the temporary drawer are deleted.
• T he layout cannot be saved. The layout drawer will not appear.
* When this setting is changed, the data in the layout drawer is deleted.
Normally this mode should be used.
Restore exit layout at next start:
The layout is retained when you exit this software. The layout is restored the next time you
start this software.
Save exit layout in layout drawer:
The layout is automatically saved when you exit this software. The next time you start this
software, the work area is blank. The saved layout data is in the layout drawer.
Set whether or not the touch pen is used as a digitizer pen.
In Pen digitizer mode,
• Y ou can write on a sheet with a touch pen, regardless of whether the mode is Content
manipulation mode or Sheet manipulation mode. (See page 20.)
• Y ou can manipulate a sheet and contents with your finger. (You cannot write with your finger.)
* To use the touch pen as a digitizer pen, "Input mode" in the Touch Pen Utility must be set to
"Pen Digitizer".
* When set to "Linked", "Pen digitizer mode" will automatically activate when "Input mode" is
set to "Pen Digitizer" in the Touch Pen Utility.
Specify the folder for saving files scanned with the Network Scanner Tool.
Touch "Browse" and specify the folder.
(This setting must be the same as the Network Scanner Tool setting. See the Network Scanner
Tool user's guide.)
Set a background image for the work area.
Select from the provided images.
Set a background image for the work area.
Select a custom image.
Specify the path to the image, or touch "Browse" and select the image file.
You can set the boldness of pens/Fluorescent Pen (see page 20).
The boldness cannot be set individually.
You can display a clock and timer in the work area.
The timer will show the amount of time that has elapsed since the software was started.
• S et whether or not operation guidance is displayed when the software is started.
• S et whether or not a software keyboard is displayed in the software.

Settings