Using Sheets; Manipulating A Sheet (Sheet Manipulation Mode) - Sharp PN-L401C Operation Manual
Touch viewer series
Hide thumbs
Also See for PN-L401C:
- Operation manual (63 pages) ,
- Setup manual (36 pages) ,
- Operation manual (49 pages)
Table of Contents
Advertisement
Using sheets
Before manipulating a sheet, you must select what will be manipulated.
: Sheet manipulation mode
: Content manipulation mode
How to change modes:
1. Touch the sheet you want to manipulate.
2. Touch
/
on the Sheet Bar.
Switch between "Sheet manipulation mode" and "Content manipulation mode" by repeatedly touching.
TIPS
• W hen a sheet is first displayed, the mode is Sheet manipulation mode. In the case of a Web page, the mode is Content
manipulation mode.
Manipulating a sheet (Sheet manipulation mode)
Select Sheet manipulation mode and perform the action.
n Moving a sheet
Drag the sheet to move it.
You can also flick the sheet to move it in the flicked direction.
n Returning a sheet to the drawer
Close the sheet.
1. Drag the sheet to the drawer.
• A blue frame appears on the drawer.
• If the desired drawer is not open, the drawer opens when you move the sheet to the drawer tab.
2. Remove your finger or touch pen from the sheet.
The file returns to the drawer.
Caution
• I f you store a file in a drawer other than its original drawer, the file itself will be moved to the folder of the stored drawer.
• I f there is a file with the same name in the new location, a selection screen will appear asking you if you want to overwrite the
existing file or save the file under a different name.
To save the file with numbers such as "_rev(1)" added to the end of the file name, touch "Save under different name".
(If the same file name already exists, the number in "( )" is incremented.)
To overwrite the original file, touch "Overwrite".
n Rotating a sheet
Rotate on a sheet to rotate the view of the sheet.
TIPS
• A Web sheet cannot be rotated. A sheet on which a Web sheet is captured can be
rotated. (See page 13.)
16
E
Manipulate a sheet.
(Move a sheet, change the size of a sheet, etc.)
Manipulate the contents of a sheet.
(Change the location or size of content shown on a sheet, etc.)
When this is done, the sheet is fixed to the work area.
Advertisement
Table of Contents
