Sharp PN-L401C Operation Manual page 15

n Installing the Network Scanner Tool
The Network Scanner Tool is used to acquire an image from a SHARP multifunction machine connected to the same network.
Installing the Network Scanner Tool
Use the Network Scanner Tool (Version 3.3 or later) that is provided with the multifunction machine. (If already installed, there is
no need to reinstall.)
For details on installing and using the Network Scanner Tool, see the Network Scanner Tool user's guide. For questions
on the compatibility of your multifunction machine or the Network Scanner Tool, contact your dealer or authorized service
representative.
Configuring settings for the Network Scanner Tool
The folder that will be used to acquire images scanned from the multifunction machine must be stored as a destination in the
multifunction machine's address book.
When creating a profile, select "Move file to folder" and set the path to the folder for acquiring images (any folder) in "Details".
Caution
• D o not use the same folder like Pen Software to import the scanned files.
Configuring settings in this software
Set the folder that you set in the Network Scanner Tool above in "Settings" - "General" - "Monitored folder path" of this software.
(See page 26.)
TIPS
• A ll files which you send to this folder will be moved to the temporary drawer of this software.
Uninstalling
Exit the Network Scanner Tool and remove "Network Scanner Tool" (or "Sharpdesk") from "Uninstall a program" (or "Programs
and Features") in the "Control Panel".
15
E