8-10
8.4.6
Removal of the Back Kit Assembly (
This section contains instructions for disassembling the radio.
8.4.6.1 Removal of the Chassis (54)
1. With the Battery removed, disengage the Chassis (54) using the Chassis/Knob opener
(P/N: PMLN7204A) as shown in
NOTE: The Vacuum Port seal (56) and the Ventilation Label (57) must be removed each
2. After the Chassis (54) is disengaged, slide the chassis assembly down and lift it away from
the Front Kit (A) and lay both sub-assemblies on the ESD table mat as shown in
Chassis/Knob opener
Figure 8-10. Disengage the Chassis
time the Chassis is removed (for leak test).
Figure 8-11. Remove the Chassis Assembly
Disassembly/Reassembly Procedures: Radio Disassembly
)
B
Figure
8-10.
Figure
8-11.