Motorola APX 1000 Basic Service Manual page 220

7-12
7.4.5.6 Removal of the Keypad Board (10) and Keypad Flex (11)
1. With the Keypad Retainer (12) removed, gently detach the Keypad Flex (11) from the Keypad
Board (10) as shown in
!
a u t i o n
2. With the Keypad Flex (11) detached, gently lift the end of the Front Kit Flex to make way for
the Keypad Board (10). With the aid of the back of the black stick, gently lift the Keypad
Board (10) from the Front Housing (2) as shown in
!
a u t i o n
!
a u t i o n
Figure 7-17.
When separating the flex and small interconnects, care is
needed to avoid damage to the interconnect and surrounding
on-board components
Figure 7-17. Detach the Keypad Flex from Keypad Board
When lifting the Front Kit Flex, care is needed to avoid
excessive bending and damage to the Flex.
When lifting the Keypad Board with the black stick, care is
needed to avoid piercing and damage to the Keypad.
Disassembly/Reassembly Procedures: Radio Disassembly
Figure 7-18.