Removing The Control Board Assembly; See Fig. - JVC DD-8E Service Manual

3.2.5 Removing the Control board assembly

(See Fig.10 to 12)
(1) Remove the two screws L attaching the Control board as-
sembly. (See Fig.10)
(2) Remove the one screw M attaching the Control board as-
sembly. (See Fig.11)
(3) Disconnect the board to board connector connected con-
nector CN105 to AMP board assembly. (See Fig.12)
L
Fig.10
M
Fig.11
Control board assembly
CN105
Fig.12
L
AMP board
assembly
(No.MB563)1-25