Removing The Dvd Assembly - JVC DD-8E Service Manual

3.1.8 Removing the DVD assembly

(See Figs.18 and 19)
• Remove the side panel L, side panel R, top cover, front base,
audio board, tuner, rear panel and LAN board assembly.
(1) From the right side of the main body, remove the two
screws Q attaching the DVD assembly. (See Fig.18)
(2) From the top side of the main body, remove the screw R
and screw S attaching the DVD assembly. (See Fig.19)
Reference:
When removing the screw R, use a screwdriver shown
as follows.
TORX Driver: size T10
Parts number: DR-L70
(3) Disconnect the card wires from connectors (CN471,
CN472, CN473) on the main board. (See Fig.19)
(4) Disconnect the wire from connector
sembly. (See Fig.19)
(5) Take out the DVD assembly from the main body.
1-16 (No.MB563)
CN704 on the DVD as-
LAN board assembly
DVD board
Fig.18
Main board
CN471
DVD assembly
CN473
CN704
CN472
R
Fig.19
CN351
S