Removing The Audio Board - JVC DD-8E Service Manual

3.1.4 Removing the audio board

(See Figs.11 and 12)
• Remove the side panel L, side panel R, top cover and front
base.
(1) From the back side of the main body, remove the screw F
and three screws G attaching the audio board to the rear
panel. (See Fig.11)
(2) From top side of the main body, remove the two screws H
attaching the holder. (See Fig.12)
(3) Take out the holder from the main body in the direction of
the arrow. (See Fig.12)
(4) Disconnect the connector
the main board. (See Fig.12)
(5) Disconnect the wire from the connector
dio board. (See Fig.12)
(6) Disconnect the card wire from the connector
audio board. (See Fig.12)
(7) Remove the audio board and then disconnect the wire from
the connector CN421 on the main board. (See Fig.12)
(8) Take out the audio board from the main body.
CN202 on the audio board from
CN204 on the au-
CN201 on the
F
Rear panel
G
Fig.11
Main board
Holder
H
CN421
Fig.12
CN202 CN204
H
CN201
Audio board
(No.MB563)1-13