Data Logger; Breaker Maintenance - GE T35 Instruction Manual

6.4 RECORDS
PATH: ACTUAL VALUES
 DATA LOGGER

The
OLDEST SAMPLE TIME
gets full, at which time it will start counting at the defined sampling rate. The
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the
COMMANDS
PATH: ACTUAL VALUES
 BREAKER 1

6
There is an identical menu for each of the breakers. The

COMMANDS CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
6-20
 
RECORDS

DATA LOGGER

OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
MESSAGE
2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It will be static until the log
 menu for clearing data logger records.
CLEAR RECORDS
 
RECORDS MAINTENANCE
BKR 1 ARCING AMP A:
0.00 kA2-cyc
BKR 1 ARCING AMP B:
MESSAGE
0.00 kA2-cyc
BKR 1 ARCING AMP C:
MESSAGE
0.00 kA2-cyc
BKR 1 OPERATING TIME
MESSAGE
A:
BKR 1 OPERATING TIME
MESSAGE
B:
BKR 1 OPERATING TIME
MESSAGE
C:
BKR 1 OPERATING
MESSAGE
TIME:
menu for clearing breaker arcing current records. The
T35 Transformer Protection System
NEWEST SAMPLE TIME

BREAKER 1(6)
0 ms
0 ms
0 ms
0 ms
values are in units of kA
BKR 1 ARCING AMP
6 ACTUAL VALUES
6.4.4 DATA LOGGER
represents the time the

6.4.5 BREAKER MAINTENANCE

2
-cycles. Refer to the
BREAKER OPERATING TIME
GE Multilin
is