Records; User-Programmable Fault Reports; Event Records; Oscillography - GE T35 Instruction Manual
Transformer protection system ur series
Hide thumbs
Also See for T35:
- Instruction manual (610 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (344 pages)
Table of Contents
Advertisement
6 ACTUAL VALUES
6.4RECORDS
PATH: ACTUAL VALUES
RECORDS
USER-PROGRAMMABLE
FAULT REPORT
MESSAGE
MESSAGE
This menu displays the user-programmable fault report actual values. See the User-Programmable Fault Report section in
chapter 5 for additional information on this feature.
PATH: ACTUAL VALUES
RECORDS
EVENT RECORDS
MESSAGE
MESSAGE
MESSAGE
The event records menu shows the contextual data associated with up to the last 1024 events, listed in chronological order
from most recent to oldest. If all 1024 event records have been filled, the oldest record will be removed as a new record is
added. Each event record shows the event identifier/sequence number, cause, and date/time stamp associated with the
event trigger. Refer to the
COMMANDS
PATH: ACTUAL VALUES
RECORDS
OSCILLOGRAPHY
MESSAGE
MESSAGE
MESSAGE
MESSAGE
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The
value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillog-
CYCLES PER RECORD
raphy section of chapter 5 for additional details.
A trigger can be forced here at any time by setting "Yes" to the
menu for information on clearing the oscillography records.
CLEAR RECORDS
GE Multilin
USER-PROGRAMMABLE FAULT REPORT
NEWEST RECORD
NUMBER: 0
LAST CLEARED DATE:
2002/8/11 14:23:57
LAST REPORT DATE:
2002/10/09 08:25:27
EVENT RECORDS
EVENT: XXXX
RESET OP(PUSHBUTTON)
EVENT: 3
POWER ON
EVENT: 2
POWER OFF
EVENT: 1
EVENTS CLEARED
menu for clearing event records.
CLEAR RECORDS
OSCILLOGRAPHY
FORCE TRIGGER?
No
NUMBER OF TRIGGERS:
0
AVAILABLE RECORDS:
0
CYCLES PER RECORD:
0.0
LAST CLEARED DATE:
2000/07/14
15:40:16
FORCE TRIGGER?
T35 Transformer Protection System
6.4.1 USER-PROGRAMMABLE FAULT REPORTS
6.4.2 EVENT RECORDS
EVENT 3
DATE: 2000/07/14
EVENT 3
TIME: 14:53:00.03405
Date and Time Stamps
6.4.3 OSCILLOGRAPHY
Range: No, Yes
command. Refer to the
6.4 RECORDS
6
COMMANDS
6-19
Advertisement
Table of Contents
