PTP 250 User Guide
Comparing actual to predicted performance
For at least one hour of operation after disarming, monitor the link to check that it is
achieving predicted levels of performance.
To check performance, select menu option Status. The System Status page is displayed
(Figure
6-24). Monitor the following attributes:
•
Link Loss
•
Transmit Data Rate
•
Receive Data Rate
For more information on these attributes, refer to
PTP LINKPlanner provides the prediction in the form of an installation report.
Figure 6-24 System Status page
phn-2182_003v004 (Oct 2011)
Viewing the system status
UNDER DEVELOPMENT
Connecting link to the network
on page 7-8.
6-33