GE
Grid Solutions
339 Motor Protection System
Chapter 3: Interfaces
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
Interfaces
There are two methods of interfacing with the 339 Feeder Protection System.
•
Interfacing via the relay keypad and display.
•
Interfacing via the EnerVista 3 Series Setup software.
This section provides an overview of the interfacing methods available with the 339 using
the relay control panels and EnerVista 3 Series Setup software. For additional details on
interface parameters (for example, settings, actual values, etc.), refer to the individual
chapters.
3–1