Channel Library Operations - Yamaha CL5 Reference Manual

6 DELAY button
Switches the output port delay on or off.
7
Ø (Phase) button
Switches the phase of the signal assigned to the output port between normal phase
(black) and reverse phase (yellow).
8
GAIN knob
Adjusts the output gain of the output port. To adjust this value, press the knob in the
screen to select it, and then operate multifunction knobs 1 - 8. Rotate the knob to set
the value in 1.0 dB steps. Rotate the knob while pressing and holding it down to set the
value in 0.1 dB steps. The current value appears immediately below the knob.
9
Level meter
Indicates the level of the signal assigned to the output
10 Tabs
Switch the output ports controlled in groups of up to eight ports. Tabs are categorized
into three groups: DANTE, SLOT, and PATCH VIEW. To display tabs in the desired group,
press the group name button located at the right or left end of the bottom row.

Channel library operations

The "OUTPUT CHANNEL LIBRARY" enables you to
store and recall various parameters for output channels.
To recall a library item, select an output channel and
press the LIBRARY button on the SELECTED
CHANNEL VIEW screen.
For details on using the library, refer to the "Using the
library" section in the separate Owner's Manual.
port.
LIBRARY button
58
OUTPUT channels
Reference Manual