TURNING THE SUBWOOFER ON AND OFF Pairing the Units for Wireless Operation SWITCHING SOURCES ADJUSTING THE SYSTEM’S VOLUME MUTING THE SYSTEM USING BLUETOOTH USING JBL SOUNDSHIFT™ USING JBL CONNECT USING AUDIO FEEDBACK USING VIRTUAL SURROUND USING HARMAN VOLUME ADJUSTING THE BASS...
INTRODUCTION Wall Mount Bracket Thank you for purchasing the JBL Cinema SB450. The JBL Cinema SB450 is designed to bring an extraordinary sound experience to your home entertainment system. We urge you to take a few minutes to read through this manual, which describes...
JBL SoundShift®: Press this button to engage JBL SoundShift. JBL SoundShift allows you to instantly switch between sound from your TV and sound from your phone or tablet. See the “Using JBL Software: The USB connection is for manual software updates SoundShift”...
2) Wireless Pairing Button 3) Crossover 4) Power Input AC 5) Phase Attention: Your JBL CINEMA SB450 comes with subwoofer already paired from the factory, please refer to the subwoofer connection section of this owner’s manual only if you are WALL-MOUNTING THE SOUNDBAR...
HDMI connectors. NOTE: The JBL CINEMA SB450 supports HDCP 2.2 on all its HDMI inputs and output, meaning that you can connect directly any 4K ultra HD source to your soundbar.
JBL control to turn the soundbar on. To put the soundbar in the Standby Cinema SB450 remote control or pressing the source button on mode, press either Power button while the soundbar is on.
JBL Connect lets you wirelessly daisy chain two speakers. JBL Connect requires an additional compatible speaker like JBL Flip 3, Test the connection by streaming music from your device to JBL Xtreme, or JBL Pulse 2. For more information, please visit our your JBL Cinema SB450. website at www.jbl.com To add an additional Bluetooth device (up to 3), repeat steps 1 &...
Press the JBL Connect button on your other JBL speaker. Harman Display Surround brings rich virtual surround sound Once the soundbar and secondary JBL speaker are to your home entertainment experience. Turn Harman Virtual connected, the LED will turn solid white.
LED does not flash, release the button and try again. Press the soundbar top-panel VOLUME UP button Aim the TV remote at the front of the JBL Cinema SB450 and SUBWOOFER PHASE SWITCH slowly press the VOLUME UP button on the TV remote until the Harman Display Surround button flashes white for one This switch determines whether the subwoofer’s piston-like action...
TROUBLESHOOTING If your JBL Cinema SB450 does not perform the way you think it should, check whether the problem is covered in this section before contacting you dealer or a JBL representative. Problems Solutions If the speaker does not turn ON •...
Page 13
Amplify the 4K Ultra-HD revolution with the sound only JBL can deliver. Features 4K Ultra-HD Soundbar The JBL Cinema SB450 soundbar fills your home cinema with superb JBL sound and is fully compatible with 4K Ultra-HD televisions. The JBL Cinema SB450’s Remote Control 8-inch (200mm) 200W Wireless Subwoofer Learning feature allows you control the whole system with the TV remote you already have.
Need help?
Do you have a question about the CINEMA SB450 and is the answer not in the manual?
Questions and answers