REMOTE CONTROL FUNCTIONS PLACING THE JBL CINEMA SB150 OPERATION TURNING THE JBL CINEMA SB150 ON AND OFF OPERATING THROUGH BLUETOOTH ® ADJUSTING THE SYSTEM VOLUME SURROUND MODE BUTTON PROGRAMMING JBL CINEMA SB150 TO RESPOND TO YOUR TV REMOTE TROUBLESHOOTING SPECIFICATIONS...
JBL CINEMA SB150 Optical cable Introduction Thank you for choosing this JBL product. The JBL CINEMA SB150 powered soundbar speaker system is a complete, integrated sound system that will create an extraordinarily realistic cinema experience in your own living room.
Power Button: The Power button toggles the JBL CINEMA SB150 CONTROLS AND CONNECTIONS between ON and Standby. When the JBL CINEMA SB150 is in Standby mode (the LED indicator is amber), press this button to turn the system ON (the button LED indicator turns white).
JBL CINEMA SB150 will turn green). To put the system in the Standby mode, press the power button while the system is switched ON (the Wall-mounting the soundbar power indicator on the JBL CINEMA SB150 will turn amber).
First, make certain that the rear panel power switch is turned ON. Then, short 3. Making sure that the bracket’s flat side is against the wall, attach the press the JBL CINEMA SB150’s Power button either on the soundbar or the wall-mount bracket to the wall at the locations you marked, using hardware remote.
Down, Volume Up, Volume Down and Up simultaneously for Mute). on the JBL CINEMA SB150 or remote to activate the source. If the JBL CINEMA 4. Aim the TV remote at the front of the soundbar and slowly press the...
JBL CINEMA SB150 TROUBLESHOOTING If your JBL CINEMA SB150 system does not perform the way you think it should, check whether the problem is covered in this section before contacting your dealer or a JBL representative. Problems Solutions If the soundbar does not turn ON •...
Need help?
Do you have a question about the CINEMA SB150 and is the answer not in the manual?
Questions and answers