Advertisement
Quick Links
Assembly Instructions
CALL US FIRST
1-877-PREPAC1
1-877-773-7221
Mon - Fri
7am - 4pm PST
10am - 7pm EST
•
For help with assembly
•
If you have received a damaged or
defective part or are missing hardware.
We will process replacement parts
business days or less. Parts are shipped via
UPS Ground or mail.
Before you call please:
1) Record the following information from the
shipping label on the outside of the box.
You will need it for warranty purposes:
• Ship To Name
• Sales Order Number
2) Note the
product model number.
3) Review the contents of your shipment to
determine what you are missing. This unit
is shipped in 3 cartons. Make sure you
have received all cartons.
Online Option:
Fill out the Replacement Parts Order form in the Product
Support section of our website: www.prepacmfg.com
Required Tools
Screwdrivers
in 2
Phillips Head
Flat Head
Hammer
Queen
Platform Storage Bed
Model # BQ-6200-3K
This product is shipped in
1 of 3
+
Make sure you have all cartons.
Sometimes cartons shipped on the same
day get separated and are delivered on
Optional Tools
Using a power screwdriver
will speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.
3 cartons
2 of 3
3 of 3
+
different days.
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0625-R
2010-04-22
Advertisement
Related Manuals for Prepac Queen
Summary of Contents for Prepac Queen
- Page 1 Optional Tools Required Tools Screwdrivers Phillips Head Using a power screwdriver will speed up assembly. Prepac Manufacturing Ltd. Flat Head Caution 6705 Dennett Place Do not over tighten any screw. Delta, BC V4G 1N4 The last few turns of each screw...
- Page 2 Hardware Identification Bed Hardware JRN Nut JCB Connector T Spacer Drawer Slide Screw (24) (24) (24) (90) RM-0312 RM-0310 bronze (cherry / espresso) RM-0628 RM-0074 RM-0311 chrome (white / maple) RM-0314 black Allen Key RM-0313 Drawer Slides for Bed LEFT Slide (6) RIGHT Slide (6) Drawer Hardware 1 LEFT Drawer Slide per Drawer (Total = 6)
- Page 3 Bed Parts Upper Stabilizer Lower Stabilizer Inner Gables (2) Plywood Slats (9) Metal U-channel with Outer Gables (2) GA-4108 black ST-4120 black ST-4121 black BF-2000-PW Blocks (2) GA-4120 black ST-4920 cherry ST-4921 cherry BF-3000-C GA-4920 cherry GA-4908 cherry ST-4620 espresso ST-4621 espresso GA-4620 espresso GA-4608 espresso...
- Page 4 STEP 1 Estimated Time: 10 minutes Attach metal U-channels to each outer gable using drawer slide screws Drawer Slide Screw STEP 2 Estimated Time: 15 minutes Attach T spacers to outer gables with drawer slide screws. Drawer Slide Screw Page 4 of 20...
- Page 5 STEP 3 Estimated Time: 10 minutes Attach drawer glides to T-spacers on outer gables as shown in the photo Position the Drawer Glides with: A) The wheel at the finished side B) The wheel on the unfinished bottom Finished Side Bottom Use 14th hole Use 1st hole...
- Page 6 STEP 4 Estimated Time: 5 minutes Insert JRN nuts into the holes on each end of the inner gables. The holes are drilled through. You can insert them from either side. Insert the nut as shown, so that the hole lines up with the hole on the edge of the gable.
- Page 7 STEP 5 Estimated Time: 5 minutes Identifying the upper and lower stabilizers Insert JRN nuts into the holes on each end of the upper (B3) and lower (B4) stabilizers. Upper Stabilizers Top edge (FINISHED) is rounded Upper Stabilizers Side hole is close to the UNFINISHED edge...
- Page 8 STEP 6 Estimated Time: 10 minutes Attach “T” spacers and drawer glides to Inner Gables 4” Bottom Attach “T” spacers to ONE side of each inner gable with drawer slide screws Drawer Slide Screw IMPORTANT: Before attaching the drawer glides, determine the Attach drawer glides to “T”...
- Page 9 STEP 7 Estimated Time: 5 minutes Using JCB connectors, and the Allen Key provided, attach each lower stabilizer (B4), one at a time, to both inner gables Finished edge IMPORTANT Identifying the Lower Stabilizer The screw hole is at the top, close to the finished edge Connector If you have any difficulty tightening the JCB connector, use a screwdriver to adjust the JRN nut to make sure...
- Page 10 STEP 8 Estimated Time: 5 minutes Using JCB connectors, attach each upper stabilizer (B3), one at a time, to both inner gables. Top edge (FINISHED) is rounded Upper Stabilizer The screw hole is closest to the lower, unfinished edge Page 10 of 20...
- Page 11 STEP 8 Estimated Time: 10 minutes Attach one outer gable (B1) to stabilizers with JCB connectors Page 11 of 20...
- Page 12 STEP 9 Estimated Time: 5 minutes Spread the wooden slats out across the inner stabilizers Slide the slats into the wide spaces of the metal U-channel (B6) on one outer gable. Slide Page 12 of 20...
- Page 13 STEP 10 Estimated Time: 10 minutes Attach second outer gable to stabilizers with JCB connectors Secure the gable in place with connectors, but don’t fully tighten Ensure the slats are set inside the u-channel and that they haven’t pulled out of the first outer gable. Firmly tighten the connectors Page 13 of 20...
- Page 14 Drawer Parts Identification Drawer Front (6) Left Drawer Side (6) Drawer Bottom (6) Drawer Back (6) Right Drawer Side (6) DF-4101 black DS-0415W-L DB-4100 DK-4100W DS-0415W-R DF-4901 cherry Plywood unfinished unfinished Plywood DF-4601 espresso DF-4701 maple DF-4001 white Page 14 of 20...
- Page 15 STEP 11 Estimated Time: 5 minutes PER DRAWER Insert cams into drawer sides Left Drawer Side Right Drawer Side Make sure arrow faces toward hole for twister dowel Screw green twister dowels into drawer fronts To see a video showing how the cam and connectors ONLINE work, or how to attach drawer glides, visit our website: HELP...
- Page 16 Attach drawer sides to drawer back with 1½” Hi Lo screws 1½” Hi Lo Screws Attach drawer front and tighten cams using a flat head screwdriver Right Drawer Side Left Drawer Side Locked Locked Unlocked Unlocked Turn 210° Turn 210° Page 16 of 20...
- Page 17 Turn drawer upside down and slide drawer bottom into grooves Secure the drawer bottom to the drawer back with nails Use 5 nails per drawer Page 17 of 20...
- Page 18 Attach drawer slides to left and right drawer sides using drawer slide screws Right Drawer Side Drawer Slide Screws Left Drawer Side Drawer Slide Screws Page 18 of 20...
- Page 19 STEP 12 Estimated Time: 2 minutes Insert drawers Note: When drawers are installed correctly, you will not be able to remove them without first lifting up the drawer front. Page 19 of 20...
- Page 20 Furniture Care Q&A How do I clean your products? We recommend that you simply wipe your products with a clean, damp cloth and then dry immediately with another clean cloth to maximize the life span and look of your unit Can I paint or varnish your products? Our products are made from durable composite woods with a laminate finish and therefore should not be painted or varnished.
Need help?
Do you have a question about the Queen and is the answer not in the manual?
Questions and answers