Imprinting - Hitachi HT-4139-48 Instruction Manual

5.2.3 Imprinting

Item
Paper side
Character
Character size
Print position
Contents
Print location
Delete
Direction
Number of digit
Color
(1) Example of imprinting
Imprint: one location or
Location-1
Sequential No.: A00012
Feed
direction
Ｌ
Location-1
Note: If "L" is shorter than 100 mm, imprint at Location-2 cannot be done. Even
though the Location-2 is specified, imprint is performed at Location-1.
・"B" will be equal to print pitch（2.62mm or 3.31mm）x 4 characters.
・"A" should be 5～375±2mm.
・"C" should be longer than 38 mm or an error will be reported.
5-10
Front side only
Numbers (0-9), alphabet (A-Z), space, hyphen, period, special
character for dual feed protection
Standard, double-size character
Can be specified for each job group, for each sheet group.
Serial numbers whose initial number is specified, etc.
2 locations (Location-1, Location-2)
Mark "V" will be printed continuously for deletion
Two directions
One location: max 36 digits
Two locations: max 16 digits x 2
red
Reverse direction
Feed
direction
Reverse
direction
Content
＊１
Imprint: Location-2
Deletion: Location-1
Sequential No.: A00123
Feed
direction
Ｃ
Location-2
Ｂ
Location-1
Ａ