2.6.3 Information display
With "Information display" you can confirm the number of readings and the date of
replacement for each current rollers. If you reset these with "Operation Parameter
Setting " you will see the latest information.
・Current information of each rollers in use
・After a roller is replaced and the numbers are reset by "Operation Parameter Setting"
2-30
• Sheet count means the total numbers
scanned.
• Date of replacement shows the date for
current rollers in use.
・The sheet count should be "0".
・Confirm the date of replacement is
updated. (Time setting in the PC should be
correct.)
If contents of display are correct, click the
"End" Button.
If the numbers are not reset, redo the
counter reset process.