Advertisement
2. REMOVAL OF DVD DECK PARTS
NOTE
1. Do not disassemble the DVD DECK PARTS except listedparts
here. Minute adjustments are needed if the disassemble is done.
If the repair is needed except listed parts, replace the DVD
MECHA ASS'Y.
2-1: TRAY (Refer to Fig. 2-1-A)
1. Set the Tray opened. (Refer to the DISC REMOVAL METHOD
AT NO POWER SUPPLY)
2. Unlock the support 1 and remove the Tray.
1
Tray
NOTE
1. In case of the Tray installation, install them as the circled section
of Fig. 2-1-B so that the each markers are met.
Tray
Main Frame Ass'y
2-2: MAIN CHASSIS ASS'Y (Refer to Fig. 2-2-A)
1. Remove the Main Chassis Ass'y from the Insulator (R).
2. Unlock the support 1.
3. Remove the Main Chassis Ass'y.
Main Frame Ass'y
Main Chassis Ass'y
NOTE
1. In case of the Main Chassis Ass'y, install it from (1) to (6) in
order. (Refer to Fig. 3-2-B)
Main Frame Ass'y
2-3: RACK LOADING/MAIN GEAR/ RACK LOADING SPRING
1. Remove the Rack L Spring.
Fig. 2-1-A
2. Press down the catcher 1 and slide the Rack Loading.
3. Remove the Rack Loading, Rack Loading Spring and Main Gear.
2-4: CLAMPER ASS'Y/INSULATOR(R)/LEVER SWITCH
Fig. 2-1-B
1. Remove the screw 1.
2. Remove the Lever Switch.
3. Remove the 2 Insulator (R).
4. Press the Clamper and rotate the Clamper Plate clockwise, then
5. Remove the Clamper Plate, Clamper Magnet and Clamper.
Insulator (R)
(Green)
1
Fig. 2-2-A
No. 52133
Rack Loading
1
2
Move it to the direction
of the arrow.
Main Frame Ass'y
(Refer to Fig. 2-3)
Rack Loading Spring
Rack L Spring
1
(Refer to Fig. 2-4-A)
unlock the 3 supports 2.
Insulator (R)
(Green)
Clamper Plate
Clamper Magnet
Lever Switch
2
2
1
2
AV-20FD24
Main Chassis Ass'y
6
3
4
5
6
Check Lock
4
5
Fig. 2-2-B
Rack Loading
Main Gear
Main Frame Ass'y
Fig. 2-3
Insulator (R)
(Green)
Main Frame
Clamper
Fig. 2-4-A
9
Advertisement
