Advertisement
AV-20FD24
NOTE
1. In case of the Idler Arm installation, install as the circled section
of Fig. 2-10-B.
2. In case of the Idler Arm Spring installation, install as the circled
section of Fig. 2-10-C.
3. In case of the Chassis Spring installation, install as the circled
section of Fig. 2-10-D.
Idler Arm
Main Chassis Ass'y
Main Chassis Ass'y
2-11: FEED MOTOR (Refer to Fig. 2-11-A)
1. Remove the 2 screws 1.
2. Remove the Feed Motor.
3. Remove the Motor Gear.
12
Main Chassis Ass'y
Fig. 2-10-B
Idler Arm Spring
Fig. 2-10-C
Chassis Spring
Fig. 2-10-D
Feed Motor
• Screw Torque: 1 ± 0.5kgf•cm
NOTE
1. In case of the Motor Gear installation, check if the valueof the
Fig. 2-11-B is correct.
2. When installing the Feed Motor, check if the cable is positioned
as Fig. 2-11-C.
Motor Gear
Feed Motor
No. 52133
1 1
Main Chassis Ass'y
Motor Gear
6.1 ± 0.1mm
Safety surface for pressing
of the insert.
Main Chassis Ass'y
Feed Motor
Pass the cable
between 2 pins.
Fig. 2-11-A
Fig. 2-11-B
Fig. 2-11-C
Advertisement
