Advertisement
AV-20FD24
NOTE
1. When installing the Clamper Magnet, install it with the green face
up.
2. When installing the wire of the Lever Switch, install it correctly as
Fig. 2-4-B.
3. When installing the Lever Switch, install it correctly as Fig. 2-4-C.
4. In case of the Lever Switch installation, hook the wire on the
Main Frame as shown Fig. 2-4-D.
Lever Switch
The Lever should be position
The Lever should be position
between A and B.
between A and B.
Rack Loading
Rack Loading
A
A
2-5: TRAVERSE HOLDER/INSULATOR (F)
(Refer to Fig. 2-5-A)
1. Remove the Traverse Holder.
2. Remove the 2 Insulator (F).
Main Chassis Ass'y
Insulator (F)
(Black)
Traverse Holder
NOTE
1. After the installing of the Traverse Holder, check if the wire is like
Fig. 2-5-B.
10
Red
White
Blue
From DVD PCB
Fig. 2-4-B
B
B
Fig. 2-4-C
Lever Switch
Fig. 2-4-D
Insulator (F)
(Black)
Fig. 2-5-A
Main Chassis Ass'y
2-6: SWITCH PCB ASS'Y (Refer to Fig. 2-6-A)
1. Remove the screw 1.
2. Remove the Switch PCB Ass'y.
Switch PCB Ass'y
Main Chassis Ass'y
• Screw Torque: 4 ± 0.5kgf•cm
NOTE
1. When installing the wire of the Switch PCB, install it correctly as
Fig. 2-6-B.
Switch PCB Ass'y
2-7: RACK FEED ASS'Y (Refer to Fig. 2-7-A)
1. Remove the screw 1.
2. Remove the Rack Feed 1/2 Spring, Rack Feed 1/2 and Rack
Feed Lever.
Rack Feed 1 Spring
Rack Feed 2 Spring
Rack Feed Lever
Rack Feed 1
• Screw Torque: 3.5 ± 0.5kgf•cm
No. 52133
Traverse Holder
Fig. 2-5-B
1
Fig. 2-6-A
Black
From Relay PCB
White
Fig. 2-6-B
1
Rack Feed 2
Main Chassis Ass'y
Fig. 2-7-A
Advertisement
