Advertisement
Installing a hard disk in a hard disk box
(AY-EB500).
8 Install setting
Set the jumper pins before installing HDDs.
Remove all jumper pins originally set at the factory as
indicated below.
J2
T D M W P E T T
E S E P D S P P
Term. Power to SCSI Bus
J6
WIDE SCSI I/O
Connector
Pin 1
R
Install this jumper pin only.
J2
J1
DC Power
Connector
8 Installation to HDD-BOX
1.Disconnect the power cord of the HDD-BOX from the AC
outlet receptacle.
2. Remove 7 screws from the HDD-BOX.
3. Slide the Top Cover in direction (e-1) and pull it upward
(e-2)
e-2
Warning
Do not touch the power unit (indicated below
with hands, metal or other objects. Otherwise,
there is a danger of electric shock.
14
Top Cover
e-1
)
Advertisement
