Routing In The Private Leased-Line Network - Mitel 430 System Functions And Features

7. 3

Routing in the private leased-line network

Data services are also available in the private leased-line network. To route a call at a
gateway or transit PINX on into the private leased-line network, a PISN user is entered
as the data service destination.
PINX 1
Fax 4
222 22 20
Trunk group 1 (DSS1)
PRI
-> Call Distribution
Ex-
BRI-T Element 1
change
-> Direct dialling plan 1
Network
interfaces
330
Trunk group 2 (PSS1)
PRI
PISN
<- Network interfaces
BRI-T
S
extern
Fig. 130 Data-service routing transit from the public network with direct dialling to another PINX in the
private leased-line network.
Tab. 77 Routing parameter settings
Parameter
Trunk group 1:
• Network interfaces
• Max. incoming calls
• Maximum simultaneous connections
• Network type
• Protocol
• DDI plan
• Call Distribution Element
Direct dialling plan 1:
• Direct dialling number
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
PINX 2
PINX 1
Direct dialling plan 1
DDI no. 20
-> Call distribution
element 2
<- Trunk group 2
Parameter value
Network interfaces in this trunk group
Number of calls allowed simultaneously
Number of connections allowed simultaneously
Public
DSS1
1
1 (relevant only if there is no suitable DD number)
20 2 (reference number of a call distribution element)
Call Distribution Element 1
-> DD destination
table 1
Call Distribution Element 2
-> DD destination
table 2
User configuration
PISN user 330
<- call number
Route 2
<- route 2
Data service
DD destination table 1
Fax 4
-> User PISN 330
DD destination table 2
Fax 4
-> User PISN 330
259