Table of Contents
Advertisement
7.9.3
To complete a full system reset on the iQ3, follow these instructions.
Each step will navigate you through the menus to the required screen.
Note: This function will clear Library recordings, local FTA channels (Satellite only), WiFi settings and
RCU pairing. You must only use this option after the customer has been made fully aware that all Library
recordings, local FTA channels, WiFi settings and RCU pairing will be lost and the local FTA channels will
need to be re-scanned and both WiFi and RCU pairing set up once again.
Fast track through the menu screens
Satellite/Cable
Press the Home button
Arrow right & select Settings menu
Select
Advanced Settings
Press 0611 buttons (Installer PIN code)
then press the Select button,
the Installer Setup will appear
Select
Full System Reset
then press Select to confirm the reset
Enter the default Parental Control PIN
code 1234 to activate the reset
At the completion of the reset, the iQ3 will
return to normal Foxtel viewing
Issue 5.3.1 23/03/2015
Full System Reset (Satellite/CABLE)
Controlled Document – No Unauthorised Copying
Chapter 7A iQ3 Interconnection Methods
© 2015
Page 28 of 62
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the iQ3 and is the answer not in the manual?
Questions and answers
How can I connect a home theatre system to my iq3
To connect a home theatre system to your Foxtel iQ3:
1. Use a HDMI lead to connect the iQ3 directly to your surround sound system.
2. Then, connect the surround sound system to your TV using another HDMI lead.
3. Set the iQ3’s S/PDIF Digital Audio Output and HDMI Digital Audio Output settings to AC3.
4. Do not use S/PDIF or TOSLINK cables in this setup.
5. Note that volume control from the iQ3’s HDMI output is not available.
6. The iQ3 may not support HDMI Audio Return Channel (ARC), so always connect it directly to the TV if using ARC.
This answer is automatically generated