Panasonic KX-T30810 Installation Manual page 74

To terminate the original call and talk to the new caller.
3 beeps
co
WILL HEAR A PRESS "CO" OR " ICM"
CALL WAITI N G WHOSE I N D I CATOR
TONE IS FLASHIN G
QUICKLY
To place the original call on hold and talk to the new caller.
• I f both original call and new call are intercom calls:
(The ICM indicator will change lighting into flashing quickly when new call reaches.)
3 beeps
(
W I LL HEAR A PRESS
"HOLD"
CALL WAITING
TONE The dial
tone is
not heard.
• If original call is CO call, and new call is CO call or intercom call:
or
If original call is intercom call and new call is CO call:
3 beeps
(
W I L L HEAR A
PRESS
CALL WAITING
"HOLD"
TONE
The dial
tone IS
heard .
Description
Call waiting tone during a conversation indi­
cates there is a new incoming CO li ne call or
Intercom call.
This feature is required to be set beforehand in
the KX- T3081 0.
For programming, see page 2-24.
Operation
To terminate the original call and talk to the new
caller.
1.
You will hear a call waiting tone (3 beeps) .
2 .
Press the CO or ICM button whose indicator
is flashing quickly. The original call is now
terminated.
3.
Start talking.
To place the original call on hold and talk to the
new caller.
(The
If both original call and new call are intercom
calls:
JCM
indicator will change l i g
flashing quickly when new call reaches.)
1.
Yo u will hear a call waiting tone (3 beeps) .
2 .
P r ess the HOLD button fo
versation on hold.
3 .
Consult with the new caller.
4.
Press the ICM button to terminate the second
rn/1 nnrl tn thP nrifYin.al r:all.
tn rPtllrn
ICM
or
( )
The original
caJI is now
terminated.
)
PRESS " ICM " TO
CONSU LT WITH
THE NEW CALLER TERMINATE THE
2ND CALL AND TO
WHILE THE
RETURN TO THE
ORIGINAL CALL IS
ON HOLD ORIGINAL CALL
co ICM
" "
) PRESS CO OR " I CM "
CONSULT WITH
WHOSE INDICATOR
THE NEW CALLER
IS FLASHING WHILE THE
QUICKLY ORIGINAL CALL IS
ON HOLD
h
tin g into
r placing a con­
ICM
co
PRESS "CO" OR "ICM" TO
TERMINATE THE 2N D CALL AND TO
RETURN TO THE
ORIGINAL CALL
If original call is CO call, and new call
call or intercom call:
or
If original call is intercom call and new call is
CO call:
1.
You will hear a call waiting tone.
2 .
Press the HOLD button for placing a
conversation on hold.
3.
Press the CO or ICM b utton whose indicator
is flashing quickly.
4.
Consult with the new caller.
5. Press the CO or ICM button to terminate the
second call and to return to the original call.
Conditions
call waiting tone
•If a call waiting tone is heard and the CO or
ICM indicator does not flash, this tone
indicates a call waiting tone by special
company service.
In this case, see "Call Waiting-Outside
Line " on page 3-26.
i - I R
is CO