Table of Contents
Advertisement
Available languages
Available languages
2. Package Contents and Technical Specifications
Remote Control
2
5
6
9
10
Dust Bin
4
6
EN
1� LCD Screen
2� Return to Charger Mode Button
3� AUTO Mode Button
4� Direction Control Buttons
5� START/PAUSE Button
6� Time Scheduling Button
7� Set Current Time Button
8� Spot Cleaning Mode Button
9� Single Room Mode Button
10� Network Setup Button
11� Edge Cleaning Mode Button
12� Infrared Emitter
1
1� Filter Net
2� Sponge Filter
2
3. High Efficiency Filter
4� Dust Bin Cover
3
5� Dust Bin
6� Dust Bin Release Button
5
6
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the DEEBOT N79 and is the answer not in the manual?
Questions and answers
deebot starts cleaning at 9pm every night although no timer settings in place
@Derek John Firth
The ECOVACS DEEBOT N79 performs scheduled cleanings in AUTO Cleaning Mode. If it starts cleaning at 9 PM every night without timer settings, it is likely due to a previously set schedule that remains active as long as the robot is powered ON and charging. Since the DEEBOT loses its schedule when powered OFF, keeping it ON may cause it to continue executing an old schedule.
This answer is automatically generated
My vacuum starts then stops
The ECOVACS DEEBOT N79 vacuum starts and then stops after 2-3 minutes, beeping four times while flashing red. This issue is likely caused by old or worn-out sensors on the docking station or the vacuum itself. Cleaning the sensors thoroughly may help resolve the problem. If cleaning does not work, further troubleshooting or contacting Ecovacs support may be necessary.
This answer is automatically generated
Hi, do I ever plug the charger to the port next to the power switch?