How To Stop The Alarm Sound; Track - Furuno TZT9 Operator's Manual

2. CHART PLOTTER
[Alarm Sound]: Activate ([Sound 1 (2, 3)]) or deactivate ([Off]) the alarm buzzer.
Alarm Sound
[Sound Alarm Until Acknowledged]: Turn this item on to sound the aural alarm until an
alarm is acknowledged (see paragraph 2.10.7).
[External Volume]: Set the level for the external volume output.
[Reset Default Settings]: Select this menu item to restore default settings for the
[Alarm] menu.
2.10.7

How to stop the alarm sound

When an alarm is generated, the name of the offending alarm appears on the status
bar at the top of the screen and flashes. If [Alarm Sound] is active, the unit beeps. To
stop the flashing and silence the alarm, tap the status bar.
Status bar
Note: If [Sound Alarm Until Acknowledged] is set for [OFF], the unit continues to beep
until the cause of the alarm is removed.
2.11

Track

The track (or movement) of your ship is plotted on the screen with position data. Your
track lets you see how your ship has moved.
The track is saved to the internal memory if the track is active. A line runs between
each track point. The internal memory stores a maximum of 30,000 track points. When
the memory for track points becomes full, the oldest track points are deleted to get
space for new track points.
Your track remains on the screen when the power is turned off. You can delete the
track that you do not need from the menu.
The saved track can be shown on the screen, and you can make a route with the
saved track.
2-14
Off
Sound 1
Sound 2
Sound 3
Alarm indication (eg: anchor watch alarm)
Anchor Alarm
Sound 1