Table of Contents
Advertisement
MI 2086 Eurotest
5. Maintenance
5.1. Batteries
- Disconnect test cable and switch off the instrument, before removing
battery compartment cover!
- Hazardous voltage under the battery compartment cover!
Battery condition is currently displayed; see the battery condition mark in the right
upper corner of display. Fully dark battery frame presents full-capacity batteries.
Follow the battery condition even during carrying out measurements. Results obtained
with low battery voltage (the results may be incorrect) will be marked with Low
battery during m. warning, after finishing the measurement.
Replace all four batteries, when the battery frame is empty in static mode (no
measurement is running) or when the battery mark trips to empty frame just
temporarily, while a measurement is running (result marked with "Low battery
during m." message)!
Nominal power supply voltage is 6 Vd.c. Use four 1,5 V alkaline batteries, type IEC
LR14 (dimensions: diameter = 26 mm, height = 50 mm).
Fig. 104. Correct polarity of inserted batteries
87
Maintenance
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Eurotest 61557 and is the answer not in the manual?
Questions and answers