Appendix 6.4 Process Cpu Upgrade - Mitsubishi Electric Q26UD(E)HCPU User Manual

Appendix 6.4
(1) Added functions and supported CPU module and GX Developer versions
Function
Index modification for module designation of the dedicated
instruction ( Manuals of the intelligent function modules
that support the use of dedicated instructions)
Selection of refresh item for the COM instruction
( MELSEC-Q/L Programming Manual (Common
Instruction))
Online change (files) of SFC programs
File memory capacity change
CC-Link remote network additional mode
( CC-Link System Master/Local Module User's Manual)
Program memory check function
Read of the SFC active step comment (
Q/L/QnA Programming Manual (SFC))
Error detection in the redundant power supply system
Use of clock data of 1/1000 second
Storage of sampling trace files in standard RAM
Individual setting of refresh device on multiple CPU system
( QCPU User's Manual (Multiple CPU System))
Execution status selection of the fall instruction during online
*1
change
CC-Link block data assurance per station (
System Master/Local Module User's Manual)
Setting "8" for the number of modules in Network parameter
for CC-Link ( CC-Link System Master/Local Module
User's Manual)
CC-Link IE Controller Network (
Network Reference Manual)
SRAM card (4M bytes) (
*1 For details, refer to the following.
Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
644
Process CPU upgrade
*1
*1
*1
MELSEC-
*1
*1
*1
CC-Link
CC-Link IE Controller
Page 237, Section 9.2.1)
×: Not supported, ---: Not related to the programming tool
Serial
Function
number (first
version
5 digits)
"07032" or later
C
"07092" or later
"08032" or later
"10042" or later
"16021" or later
Programming tool version
GX Works 2 GX Developer
---
Version 8
(Version 8.22Y
Version 1.87R or
or earlier)
later
Version 8.23Z or
later
---
Version 1.87R or Version 8.23Z or
later later
---
Version 8.23Z or
later
Version 8.27D or
later
Version 1.87R or
later
Version 8.32J or
later
Version 8.68W
or later
---