Firmware And Driver Update - FANATEC CSL Elite Pedals Manual

There is also the button 'Update CSL Pedals LC Firmware', see chapter 'Firm-
ware update procedure CSL Elite Pedals LC' of this manual for more detailed
information about the firmware update process itself.

6.2 Firmware and driver update

The firmware and the PC driver can be updated to newer versions by Fanatec
for software bug fixing or introduction of new features and compatibilities.
Before first use of the ClubSport USB Adapter with CSL Elite Pedals the Club-
Sport USB Adapter has to be updated to the latest firmware version for pedals
use which is included in the latest driver package available on our website
www.fanatec.com/support.
Before first use CSL Elite Pedals LC electronics have to be updated to the lat-
est firmware version which is included in the latest driver package available on
our website www.fanatec.com/downloads.
You also have to use the latest PC driver version in order to use the CSL Elite
Pedals and/or CSL Elite Pedals LC on a PC and perform the firmware updates.
Run the downloaded file(s) and follow the instructions shown on the screen.
See more detailed description later in this user manual chapter
IMPORTANT: The ClubSport USB Adapter firmware and the CSL Elite
Pedals LC are secured by firmware and by driver so that usually it is not
possible to install wrong firmwares on the devices! Do not try to force
installation of any wrong firmware to the devices to avoid damages.
IMPORTANT: After firmware update the manually calibrated pedal po-
sitions of the CSL Elite Pedals LC have to be manually calibrated again.
Otherwise the CSL Elite Pedals LC uses the automatically calibrated posi-
tions after pressing down each pedal to 100% of mechanical travel.
This page gives you detailed informations about the currently installed PC driv-
er version and the currently installed ClubSport USB Adapter firmware version.
32