Table of Contents
Advertisement
CHAPTER 9
DECOMISSIONING CHECKLIST
ENGINE
Run engine. Pour a fuel stabilizer/conditioner in the fuel tank.
Allow time for it to circulate through the fuel system.
Change all engine fl uids as referenced in the engine
manufacturer's owners manual. Contact a Regal dealer.
Drain cooling and exhaust system by a marine professional
Pickle the engine. Contact a Regal dealer for more information.
Spray all exterior parts with a rust preventative.
OUTBOARD UNIT
Perform maintenance as referenced in the manufacturer's
owners manual. Contact your Regal dealer.
Remove propeller. Refurbish as needed.
After cleaning touch up paint on unit as needed.
Apply coat of wax to outboard shroud and exterior parts.
BOAT
Check hull bottom for any fi berglass damage.
After cleaning apply a coat of wax to hull and deck surfaces.
Pour a pint of 50/50 antifreeze into bilge pump.
Never block up boat bottom. May cause structural damage.
9-2
- Quick Links:
- Instrumentation
- Electrical
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 23 OBX and is the answer not in the manual?
Questions and answers
How to turn depth gauge on and off
The document does not provide specific instructions on how to turn the depth gauge on and off for the Regal 23 OBX. However, it mentions that the depth gauge is connected to a transducer and has a shallow water alarm. For detailed instructions on gauge settings and operation, refer to the equipment operation chapter of the manual.
This answer is automatically generated