DePuy Mitek vapr vue Instruction Manual page 4

batteries to prevent damage due to possible battery
leakage.
7. Follow the battery manufacturer's recommendations
or your health care facility's policy for the disposal
of used batteries.
Report all problems experienced with the footswitch.
If the footswitch is not working properly, contact your
DePuy Mitek service representative for service. The
footswitch should not be used if it is not working
properly.
Changes or modifications not expressly approved by
DePuy Mitek could void the user's authority to operate
the equipment.
IMPORTANT
1. If the receiver (part of the VAPR VUE Generator)
does not receive a signal from the transmitter
(part of the VAPR VUE Wireless Footswitch) for a
period of 525 milliseconds, RF activation will no
longer be possible. However, once reception is
restored, the VAPR VUE Wireless Footswitch will
function normally.
2. The VAPR VUE Wireless Footswitch transmits in
all directions. However, every application is different
and you may need to adjust the positions of the
VAPR VUE Wireless Footswitch or VAPR VUE
Generator to obtain optimal performance.
3. Multiple VAPR VUE Wireless Footswitches and
VAPR VUE generators may be used in the same
vicinity. At any one time, each VAPR VUE Wireless
Footswitch can be paired with one and only one
VAPR VUE generator.
4. If the footswitch is tipped 60 degrees or more or
disturbed in such a way as to activate the internal
tip switch, the footswitch will be inoperable until it is
stabilized (in 2 seconds).
5. A backup means for activation should be available
(i.e., second wireless footswitch, wired footswitch,
or electrode with hand controls).
6. The footswitch should be stored with the pedals
facing up. The battery life is significantly reduced if
the footswitch is stored upside down or sideways.
3