14.2 SITRANS P DS III/P410 for differential pressure, flow rate and absolute pressure from the differential pressure series
①
Electronics side, display
(longer for cover with inspection window)
②
Connection end
③
Electrical connection:
Pg 13.5 gland (adapter)
•
M20 x 1.5 gland
•
½-14 NPT gland
•
Han 7D/Han 8D plug
•
④
Harting adapter
⑤
Protective cap of the operating buttons
⑥
Blanking plug
⑦
Safety catch
(only for "flameproof enclosure" type of protection, not shown in the drawing)
⑧
Sealing plug, with valve (optional)
⑨
Process connection: ¼-18 NPT (IEC 61518)
⑩
Clearance for rotating the enclosure
Take an additional 20 mm (0.79 inches) thread length into account
1)
Not with "flameproof enclosure" type of protection
2)
Not for "FM + CSA [is + XP]" type of protection
3)
92 mm (3.6 inch) minimum distance for rotating the pointer
4)
74 mm (2.9 inch) for PN ≥ 420 (MAWP ≥ 6092 psi)
5)
91 mm (3.6 inch) for PN ≥ 420 (MAWP ≥ 6092 psi)
6)
219 mm (8.62 inch) for PN ≥ 420 (MAWP ≥ 6092 psi)
7)
For Pg 13.5 with adapter approx. 45 mm (1.77 inches)
8)
SITRANS P410 is only available as gauge pressure and differential pressure version.
9)
Image 14-3
Pressure transmitter SITRANS P DS III/P410 for differential pressure and flow rate with caps for vertical
differential pressure lines, dimensions in mm (inches)
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
1)
2)3)
2)3
Dimension drawings
233