Faceplate Interface; Faceplate - GE B90 UR Series Instruction Manual

4 HUMAN INTERFACES

4.3FACEPLATE INTERFACE

a) ENHANCED FACEPLATE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules.
Five column LED indicator panel
b) STANDARD FACEPLATE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules. There is also a removable dust cover that fits over
the faceplate that must be removed in order to access the keypad panel. The following figure shows the horizontal arrange-
ment of the faceplate panels.
LED panel 1
Front panel
RS232 port
Small user-programmable
(control) pushbuttons 1 to 7
Figure 4–16: UR-SERIES STANDARD HORIZONTAL FACEPLATE PANELS
GE Multilin
User-programmable pushbuttons 1 to 16
Figure 4–15: UR-SERIES ENHANCED FACEPLATE
LED panel 2 LED panel 3
User-programmable
pushbuttons 1 to 12
B90 Low Impedance Bus Differential System
4.3 FACEPLATE INTERFACE

4.3.1 FACEPLATE

Display
Keypad
Front panel
RS232 port
842810A1.CDR
Display
Keypad
827801A7.CDR
4
4-13