Wireless Keys; Key Assignments; Sixfob Wireless Key Status Indications - Honeywell Lyric LCP300-LC User Reference Manual

Your wireless key (key fob) is similar to your keys or access card. If lost or stolen, another
person can compromise your security system. Immediately notify your Dealer/Installer of a
lost or stolen wireless key. The Dealer/Installer will then remove the wireless key
programming from the security system.

Key Assignments

Your wireless keys (key fobs) are set up by your installer. It is advisable to write down each
button's preprogrammed function in the space below.
NOTES: • One or more buttons may have been programmed for Emergency function.
• To activate a button function, press and hold the button for 1-2 seconds.
Button A: ___________________
Button B: ___________________
Button C: ___________________
Button D: ___________________
Button 1: ___________________
Button 2: ___________________
Button 3: ___________________
Button 4: ___________________
Button 8*: ___________________
(press and hold BOTH buttons to activate)

SiXFOB Wireless Key Status Indications

Press and release any key for system status. Status is indicated by the LEDs at the top of the key fob.
Green LEDs
Rapid Flash – Alternating about
8-20 seconds, then ON for 3
seconds
Off
Off
ON 2-3 seconds
Slow Flash for 2-3 seconds
Flash once (both LEDs)
Off
Rapid Flash for 2 seconds

Wireless Keys

IMPORTANT SECURITY NOTICE
Red LEDs
Chirp for
Off
confirmation
ON 2-3 seconds 2 Beeps
Slow Flash for 2-3
4 Beeps
seconds
Off 1 Beep
Off Silent
Off Silent
Off 1 Second beep
Off Silent
60
5800 Series wireless key
SiX™ Series wireless key
Sounder System Status
Device Enrollment
System Armed (any mode)
Alarm in progress or
System is in Audible
Emergency (Panic) Mode
Disarmed, Ready to Arm
Disarmed, Not Ready to Arm
RF Transmission
Not Hearing from the Gateway
Deleting wireless key from
system