Cleaning the Tubing
Clean the tubing before first use and daily.
1. Disconnect the flexible tubing from the device.
2. Gently wash the tubing in a solution of warm water and a mild detergent.
3. Rinse thoroughly.
4. Air dry. Inspect the tubing for damage or wear. Discard and replace as necessary.
Tubing Device Pop-Up Messages
Device pop-ups are messages that show up on the user interface screen.
Condition
Icon
Low leak:
Check mask
and tube
Description
Possible
Cause
Blocked
Blockage at
airway
tube or mask
Action
Check tube is not crushed or folded,
such that airflow is restricted. Check
mask is attached properly and
without any obstruction.
4. Tubing
27