Character Trail Settings - Sony MVS-8000X SystemMVS-7000X System User Manual

4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment
1 Density
2 Random

Character Trail Settings

You can set the effect starting position, the degree of
expansion, the slant angle of the effect region, and trail
direction, the degree to which the image disappears, the
trail type and amount of stardust, and other parameters.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following
parameters.
Knob Parameter
1 Transition
2 Expand
3 Trans Angle
4 Trail Angle
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To make the tip of the swirl stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
328
Applying Special Effects (Nonlinear Effect Settings)
Setting values
Degree to 0.00 to 100.00
which image
disappears
Degree to 0.00 to 100.00
which pixel
positions
become
more
randomized
further from
the center
Adjustment Setting values
–8.000 to
Position where
a)
+8.000
effect starts
–32.000 to
b)
+32.000
Degree of 0.00 to 100.00
expansion
–8.000 to
Angle of
+8.000
slanting in
effect region
Direction of trail –100.00 to
+100.00
Knob Parameter Adjustment
1 Density Degree to
which image
disappears
2 Random Trail type and
amount of
stardust
Setting values
0.00 to 100.00
0.00 to 100.00