Sanyo MIR-554 Instruction Manual page 23

PROGRAMMING (MENU/Edit)
4. A model program is displayed.
2 S t p 1 C y c
o
C
T i m e 7 2 : 0 0
∞
T e m p 3 7 . 0 4 . 0
The step number (Stp :step) and cycle number (Cyc :repeat number) can be changed on the top left
corner (2Stp 1Cyc) of the screen. Highlight the numerical value by shift key, and input 10Stp 31Cyc by
character input key. The step number and cycle number are changed. The screen is scrolled to the next
page by using the rightward shift key.
1 0 S t p 3 1 C y c
o
C
T i m e 7 2 : 0 0
∞
T e m p 3 7 . 0 4 . 0
M E N U
S a v e
+ / -
C a n c e l
The step number (Spt) can be changed by "Insert" or "Delete" on the menu window. Press the menu
button (MENU), to open the menu window. The menu window for a first section has no "Insert" or
"Delete". Therefore, neither insert nor delete is effective for the first section.
number is 12. The cycle number is 1 when the step number is 1. The settable cycle number is up to
98. The cycle number 99 means limitless repeat.
∞ ∞ ∞
4 . 0 4 . 0 4 . 0 4 . 0
M E N U
S a v e
I n s e r t
D e l e t e
+ / -
C a n c e l
o
C
T i m e
∞ ∞ ∞
T e m p 4 . 0 4 . 0
22
∞ ∞
4 . 0 4 . 0
The maximum step