Setting up the machine
2.7 Zero offsets
You can save the workpiece zero, for example, in the coarse offset, and then store the offset
that occurs when a new workpiece is clamped between the old and the new workpiece zero
in the fine offset.
Note
Deselect fine offset
You have the option of deselecting the fine offset via machine data
$MN_MM_FRAM_FINE_TRANS
See also
Actual value window (Page 40)
2.7.1
Display active zero offset
The following zero offsets are displayed in the "Zero Offset - Active" window:
● Zero offsets, for which active offsets are included, or for which values are entered.
● Settable zero offsets
● Total zero offset
This window is generally used only for monitoring.
The availability of the offsets depends on the setting.
Procedure
112
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling