Parameters, G code program
PRG
Name of the program to be generated
PL
Machining plane
RP
Retraction plane – (only for
machining direction,
longitudinal, inner)
SC
Safety clearance
F
Feedrate
Residual
With subsequent residual material removal
material
Yes
•
No
•
CONR
Name to save the updated blank contour for
residual material removal – (only "Yes" for
residual material removal)
Parameter
Description
Machining
•
•
Machining
•
direction
•
•
The machining direction depends on the stock removal direction and choice of tool.
Position
•
•
•
•
D
Maximum depth infeed - (only for ∇)
DX
Maximum depth infeed - (only for parallel to the contour, as an alternative to D)
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
mm
mm
*
∇ (roughing)
∇∇∇ (finishing)
Face
•
Longitudinal
Parallel to the contour
•
•
•
Front
Rear
Inside
Outside
Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
From inside to outside
From outside to inside
From end face to rear side
From rear side to end face
Unit
mm
mm
433