Troubleshooting - Beko BSS-2201 TT User Manual

6

Troubleshooting

You can solve many common water dispenser problems easily, saving you the cost of a possible ser-
vice call. Try the suggestions outlined below to see if you can solve them before calling the service
center.
Water dispenser does not operate.
• Not plugged in.
Water dispenser is not cold enough.
• Check to be sure the cold switch on the back is turned on.
• The water dispenser does not have enough backside space.
Water dispenser's hot water is not hot enough.
• Check to be sure the hot switch on the back is turned on
Compressor turns on and off frequently.
• The room temperature is too hot.
• The water dispenser does not have enough backside space.
Vibration
• Make sure that the water dispenser is placed in a balanced manner.
Water dispenser is making a lot of noise during operation.
• Check to assure that the water cooler is placed level.
Water dispenser makes too much noise.
• As each cycle ends, you may hear gurgling sound caused by the flow of refrigerant, which is
normal.
• Contraction and expansion of the inside walls may cause popping and cracking noises.
• The water dispenser is not placed level.
Water Dispenser / User Manual
11 / 11 EN