2_Battery Use; Opening The Card Compartment; Installation Of The Sim Cards; Installation Of The Microsd Card - DeWalt MD501 Quick Start Manual

10

5.1.2_BATTERY USE

In actual use, the standby time and talk time of the phone varies
with the network status, work environment and usage.
When the battery reaches a low battery level an alert will request
that the phone be charged. If this is not done immediately, un-
saved data may be lost. If the phone is left idle for long periods,
it will switched itself off.
WARNING
The phone's battery must be charged within the temperature
range of 5° C to 35° C! Please don't charge your phone outside
this temperature range, and please use the included USB-cable.
The battery can only be replaced by the service center.
NOTE
Energy saving tips:
Turn off wireless communication function when
you use Bluetooth , Wi-Fi or GPS.
® ®
Reduce the screen brightness.
Turn off the screen when not using the unit.
Disable the automatic synchronization of emails,
calendars, contacts and other applications.

5.2_OPENING THE CARD COMPARTMENT

Unscrew the two screws at the back by turning them anti-
clockwise until the back cover opens.

5.3_INSTALLATION OF THE SIM CARDS

The phone features two Micro SIM card slots. Power off the phone
before installation. If you have installed two SIM cards, you can
choose your primary card in Settings
QUICK START
SIM cards.
QUICK START / FIRST USE
WARNING
Insert Micro SIM cards only.
USE OF OTHER SIZE SIM CARDS WILL VOID WARRANTY.
5.4_ INSTALLATION OF THE MICRO-SD CARD
The Phone accepts up to 64GB Micro-SD memory cards.
Power off the phone before installation. Open the Micro-SD
card holder, and insert the Micro-SD card into the slot,
then close the Micro-SD card holder.
If you want to remove the Micro-SD card, please make sure
that the card is not in use by the phone by selecting:
Settings Storage unmount SD
WARNING
Do not try to insert or remove any of the Micro SIM or Micro-SD
cards when any external power supply is connected, otherwise
the cards or the phone may be damaged.

6_FIRST USE

6.1_POWERING ON YOUR PHONE

Press the Power key until the screen lights up.
Depending on the security settings of your SIM card, the phone
may ask you for your personal identification number (PIN)
before starting up.
The first time you power on your phone, you may be prompted
to assign a language, a date and a time zone and to enter your
personal information.
11
EN
OK.