GE CV936 Owner's Manual And Installation Instructions page 18

Installation instructions
_] iNSTALL FILTERS
* Remove protective
film rovering
the filters.
* Insert the filter into the "C" clips mounted to the top
of the vertical fi'ont panel.
* Tap the filter against one side to align with outside
opening.
* Pull the filter down into the lower slots at the bottom
of the filter support.
Filters
Junction
Box
Filter
Support
* To remoxe the filters, grasp the handle, push the
filter up and pull forx<_rd.
[_ iNSTALL OPTIONAL
COMMERCIAL HLTERS
* Remove supplied filters (if installed).
* Place the filter drip trays into the horizontal channel
in the filter panel, located behind the filters. The
grease will drain from the filters into these trays.
* Insert the filter into the "(2" clips mounted to the top
of the vertical fi'ont panel.
* Position the filter in the lo_er slots at the bottom of
the filter support.
_2_ HNAUZE iNSTALLATiON
* Refer to the operating instructions to test
all
COlltrols.
18