Yamaha fwx120 Operation Manual page 59

Permanently connecting to the Internet
using network connection service
Specify the destination in the "Basic configuration page" to connect to the Internet.
The following description also applies when you use unnumbered connections.
If you use a service that assigns only one IP address, refer to "Permanently connecting
to the Internet through a broadband line (PPPoE/CATV)" (page 49).
Before configuring the settings
NOTE
• After canceling/changing your provider contract please be sure to delete or reconfigure the
connection configuration of the product. Failure to observe this could result in unexpected
charges from your telephone carrier or provider.
• A constant Internet connection increases the risk of illegal access or attack via the Internet.
Be sure to use the product with extra attention to your network security. Refer to "Enhancing
security" (page 73) for more details.
• The descriptions in this manual use Internet Explorer 11 screens as examples. For other
environments, you have slightly different screen displays, though operations stay the same.
To configure destinations and connect to the Internet, you are required to have the
following information provided by your provider (some connection modes may not need
all of the information).
• User ID (authentication ID and account name)
• Passwords (authentication password and initial password)
• IP address
• Netmask
• Name server addresses (DNS server address, name server IP address, and DNS
server IP address)
• Default gateway address
Connecting to the Internet as a router
FWX120 Operation Manual  59
3