Yamaha fwx120 Operation Manual page 163

4
To stop saving the log, select "terminate"
in the "Save Syslog" field on the
"Configure external device" screen, and
click "Submit".
5
Hold down the USB button or microSD
button for two seconds.
The USB lamp or microSD lamp of the product
goes off.
6
Remove the external memory device.
NOTE
• The log is not recorded immediately after the start,
immediately after inserting a USB memory stick, and
right before removing the USB memory stick.
• The log cannot be written to the USB memory stick
until it is ready to be written.
• If saving of the log to the external device fails, refer
to "Unable to use USB device" (page 178).
Operating and managing the product
Notes on the log to be saved
When you start saving the log, the following log
files are generated in the USB memory stick or
microSD card.
• A file to which the log is currently written: The
file name is the same as that specified in the
"Save administration information" field on the
"Configure external device" screen.
• A backup file generated for each certain size: The
file name is generated by adding saved date/time
to the above file name.
Restriction of backup file
If the number of backup files has reached the
defined upper limit, or the memory in the external
memory device is full, the oldest backup file is
deleted.
NOTE
If the external memory device does not have sufficient
free space, the defined log file size or number of backup
files may be different from that actually generated.
FWX120 Operation Manual  163
7