Philips DV900VHS0I Owner's Manual page 46

46 MTS(Multi.Channel Television Sound) System
Your DVD/VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear
sound from two sources. Your DVD/VCR also can play tapes recorded in a second audio (usually,that
means your program is recorded in a second language). Of course, your DVD/VCR will play tapes recorded
in monaural (single-source) sound as well.
Your DVD/VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the
DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with your DVD/VCR's stereo and second audio
setups. Then follow the directions on page 47 to record in stereo or second audio and the directions on
page 48 to play back tapes recorded in Hi-Fi stereo.
Understanding On-Screen Displays
When you receive a signalfrom a channel you're watching, portions of the on-screen display shown below
will appear when you press the DISPLAY/STATUS/EXITbutton on the remote control.
The indication 2ND AUD or TV
STE'_EO that appears on this side of
the status display tells you if your
DVD/VCR is programmed to receive a
second audio or stereo broadcast (it
cannot be programmed to receive
both at the same time).
Specifically...
(_5TOP 12:cOOHA0_
- TV STEREO
STEREO
2ND AUD"
SLP 1:23:45 HIFI
J
The indication 2ND AUD or STEREO
that appears on this sideof the status
displaytells you if the program you're
watchingis availablein secondaudio
or stereo.
Thisindication is not availableduring
tape playback.
_SSTOP 12:00 AM
TV STEREO CH 02
STEREO
_2ND AUD •
_LP 1:23:45 HIEIj
jWhen a program broadcast in stereo is available,STEREO appears here.
/When a program broadcast in second audio is available,2ND AUD
f appears here.
____.When a program is availableboth in stereo and second audio,both
STEREO and 2ND AUD appear here. Even though a program is available
in stereo or second audio, you still must program the DVD/VCR to
receive or record the program. Follow the directions on page 47.
NOTE:Althougha program may be broadcastin both stereo and secondaudio,
you cannot recordin both stereo and secondaudio at the same time.
To record and play back programs broadcast in stereo, even if you havea single-speaker_ just use one of
the connections shown, then follow the steps on pages47-48.
Monitor Stereo Single
TV SpeakerTV SpeakerTV
Monaural Sound J
I RF coaxial cable (supplied) from DVD/VCR's
_LI -_ _oo
_
ANT-OUT (Antenna Out)jack to TV's
IP' J : oo
ANTENNA IN Jack Lr T _Jm /
Video cable from DVD/VCRVIDEO OUT Jack of
DVD/VCR to VIDEO IN Jack of rnonitorTV
Stereo Amplifier
or Receiver
Audio cables from
DVD/VCR AUDIO OUT
Jacks of DVD/VCR to
AUDIO IN Jacks of Stereo
Amplifier or Receiver