Table of Contents
Advertisement
Optional H ookups (cont'd) 13
Connectin_g to a TV and a Stereo
TV has Component
Video In lacks
• Set DOLBY DIGITAL and DTS to OFF on the DVD/VCR. Detailsare on pages68-69. If you playa DVD when
the settings are wrong, the sound will be distorted or you may damagethe speakers.
I
COMPONENT
VIDEO IN
0'
_
Cb/B-Y
_
Cr,ql-Y
Back ofTV
(example only)
I
2
DVD/VCR
Back of Stereo
(example only)
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect the red and white audio cables to the red and white DVD/VCRAUDIO
OUT Jacks on
the DVD/VCR and to the red and white AUDIO
IN jacks on the Stereo, matching the cable colors
to the jack colors.
3
Connect an optional component video cable to the COMPONENTVIDEO
OUT jacks on the
DVD/VCR and to the COMPONENTVIDEO
IN jacks on theTV.
4
Plug in the Stereo's
power cord.Turn
on the Stereo and select the Stereo's Auxiliary
IN station.
During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner's manual for details,
5
Plug in theTV's power cord.Turn on the'iV
and set it to the ComponentVideo
In channel, which
usually is located near channel 00. DuringAudio CD playback, you may checkthe statusofAudio CDs on
yourTV screen.During DVD playback, you will watch the programon the T_. See your"iV owners manualfor
details.
6
Connect the DVD/VCR's power cord to a power outlet. Press the POWER button, then press the
DVD/VCR OUTPUT
button so that the DVD light appears on the DVD/VCR. "HELLO" will appear
brieflyon the DVDNCR'S display panel.You shouldsee the DVD logoon the'IV screenbriefly. I f you do not,
checkyour connections and make sure the'iV is set to the correct ComponentVideoIn channel.If there isno
discin the DVDNCR,"no DISC" will appear on the display panel.
Advertisement
Table of Contents
