On-Screen Status Displays (Vcr) - Philips DV900VHS0I Owner's Manual

On-Screen Status D isplays (VCR)23
• • •o••• • o•• • rio• •1•• too• • ••• • ••1 • OQQ • OOOOI OOtOO IOtOOg • •tOOl Jot• • ••111• • • II1•• • tot • •IOO•OOO,• •,,Q••• •IOtQ••tQ••,
A status display will appear when you press the
DISPLAY/STATUS/EXIT button or certain function buttons.The con-
tents of the status display will vary.To choose the status display
mode, follow the steps below.
• Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press theVCR/-rv button so that
theVCPdTV light appears on the front of the DVD/VCR. Receiving and Recording Mode
If you select STATUS ON, then select COUNTER ONLY
ON: Channel
_ Whenever you press the STOP button or the PLAY button, the Current status
status display will appear for five seconds.After five seconds, only of tape Time
the counter will remain on the screen.You must press the DIS-
I
I
PLAY/STATUS/EXIT button to remove it. Portions of the status f I I
display also may appear when you press other function
buttons.
(STOP 12:00 AM
If you select STATUS ON, then select COUNTER ONLY TI TV STEREO -- CHI0 --
OFF: _L
STEREO
2ND AUD
@ Whenever you press the STOP button or the PLAY button, the
status display will appear for five seconds. Portions of the status P 1:23:45 HIFI
display also may appear when you press other function buttons.
If youcselect STATUS OFF:
_ The status display will not appear when you press function but-
tons.You must press the DISPLAY/STATUS/EXIT button to see the Tape Counter Audio Out Mode
status display. Speed and
Counter
Memory
Press the MENU button.
2
Press the PLAY button or the STOP button to select VCR
SET UP, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select ON
SCREEN MODE, then press the F.FWD button.
4
f
Sf S LECT Av CHOOSE ll_
STATUS
COUNTER ONLY
O END PUSH EXIT
Press the PLAY button or the STOP button to select STA-
TUS, then press the F.FWD button so that OFF (or ON)
appears beside STATUS.
ION] 1
[OFF]
5
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY button or the STOP button to select
COUNTER ONLY, then press the F.FWD button so that
OFF (or ON) appears beside it.
6
Press the DISPLAYISTATUSIEXIT button.
MTS
Broadcast
Available
Hempful
Youmay not accessa status display
when viewing a stJIIpicture, during
slow motJonplayback, or during for-
ward or reverse searching.
The status display may not appear if
a weak channel is selected and
BLUE BACKGROUND is set to OFF.
Details are on page 49.