Pioneer DDJ-SX2 Service Manual page 27

5
5. Factory reset
All settings in Utilities mode and adjustment value for Jog dial touch sensitivity can be initialized in Service mode.
[Trigger to initialize]
In order to initialize all settings in Utilities mode, press and hold both left and right SYNC buttons for over 2 seconds during
Service mode.
[Posterior condition]
LEDs wihin both left and right SYNC buttons are lit while the controller is initializing the settings.
When the initialization is completed, the LEDs are unlit.
*: All settings in Utilities mode are initialized.
Adjustment values for left and right Jog dial touch sensitivity are returned to center value.
6. Check of velocity
Behavior of velocity can be checked using Channel Level Indicator in Service Mode.
[Preparation to check velocity]
In order to check the velocity, press both left and right HOT CUE Mode buttons firstly during Service mode.
In order to select Pads of which check the velocity, press left Pad Mode button.
Relation between left Pad Mode button and checkable Pad is shown in Table-4.
State transition between Service mode and Velocity check mode is shown in Figure-5.
Table-4 Relation between left Pad Mode button and checkable Pads
Mode
Velocity check mode 1 Left Pad 1, Pad 2, Pad 3, and Pad 4
Velocity check mode 2 Left Pad 5, Pad 6, Pad 7, and Pad 8
Velocity check mode 3 Right Pad 1, Pad 2, Pad 3, and Pad 4
Velocity check mode 4 Right Pad 5, Pad 6, Pad 7, and Pad 8
*1: LED within the pressed Pad Mode button is lit with blue color.
In order to return from Velocity check mode to Service mode, press the Rotary selector.
Then the controller should return to condition right after it launches in Service mode.
5
6
Factory Reset
Checkable Pads
Left HOT CUE Mode button (*1)
Left ROLL Mode button (*1)
Left SLICER Mode button (*1)
Left SAMPLER Mode button (*1)
DDJ-SX2
6
7
Pad Mode button
7
8
A
B
C
D
E
F
27
8