Pioneer DDJ-SX2 Service Manual page 23

5
Table-1 LED behavior of when buttons are checked
Group Trigger
A Press LED color is changed as follows whenever the button is pressed.
Even if the button is released while the LED is lit, the controller holds lighting.
(The LED is embedded within the button.)
White → Red → Yellow → Green → Cyan → Blue → Magenta → Unlit → White → • • •
B Press LED is lit while the button is pressed and held.
When the button is released, the LED is unlit.
(The LED is embedded within the button.)
C C1 Press LED within HOT CUE Mode button of the same side is lit with blue color while the "C1" button is pressed and held.
When the "C1" button is released, the LED is unlit.
(LED within the HOT CUE Mode button is used in order to check the "C1" button.)
C2 LED within SAMPLER Mode button of the same side is lit with blue color while the "C2" button is pressed and held.
When the "C2" button is released, the LED is unlit.
(LED within the SAMPLER Mode button is used in order to check the "C2" button.)
C3 LED within the HEADPHONE CUE (CH1) button is lit while the "C3" button is pressed and held.
When the "C3" button is released, the LED is unlit.
(LED within the HEADPHONE CUE (CH1) button is used in order to check the "C3" button.)
C4 LED within right SYNC button is lit while the "C4" button is pressed and held.
When the "C4" button is released, the LED is unlit.
(LED within right SYNC button is used in order to check the "C4" button.)
C5 LED within left CENSOR button is lit while the "C5" button is pressed and held.
When the "C5" button is released, the LED is unlit.
(LED within left CENSOR button is used in order to check the "C5" button.)
3. Check of rotary knobs, sliders and NEEDLE SEARCH pads
All rotary knobs, sliders and NEEDLE SEARCH pad on this controller can be checked using LEDs in Service Mode.
D1 D1
F
5
6
D1 D1 D2 D2
E1 E1
E2 E2 E3 E3
E4 E4
D2 D2
DDJ-SX2
6
7
Details
D1 D1
F
D1 D1
E2 E2
D2 D2
7
8
A
B
C
D
E1 E1
E
F
23
8